TR Register Forum
https://forum.tr-register.com.au/

Small part manufacture.
https://forum.tr-register.com.au/viewtopic.php?f=5&t=503
Page 1 of 1

Author:  malcs707 [ Fri Jan 11, 2019 12:27 pm ]
Post subject:  Small part manufacture.

SMALL PART MANUFACTURE.
I was recently in a $2 shop & purchased a product called Polymer Clay manufactured by Mont Marte International P/L. This stuff can be moulded into whatever shape you need & then baked in a low temperature domestic oven to become hard . It can then be drilled, sanded & painted. I have used it to remake a broken switch knob with a perfect result. It could easily be used for making difficult-to-find TR items like Heater vent nozzles & the like. Their website will give you a stockist in your area
Cost for about 100g was $6 but it may be possible to buy direct if larger quantities are needed.
www.montmarte.net

Go mouldy.
mm

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/