Joined: Mon Sep 01, 2014 7:13 pm
Posts: 18
|
|
After eight years of competition Rusty has been undertaking an engine refresh which is going to plan. While the engine is out the clutch was checked and metal fatigue around the pressure plate springs is apparent so time for a new clutch.
Unfortunately I no longer have any information about the clutch other than it came from a Jaguar and is 8.5” and 10 splines by 1.25”. This clutch was installed following two clutch failures using TT uprated clutch parts from Moss.
Does anyone have any suggestions for a replacement that would be suitable as I understand AP no longer supply a competition clutch and the Tilton paddle clutches are only suitable for 1” fittings
Cheers
Stephen
|
|
Login
Register
FAQ
Search
