TR Register Forum
https://forum.tr-register.com.au/

High port head for sale
https://forum.tr-register.com.au/viewtopic.php?f=7&t=623
Page 1 of 1

Author:  TR1954 [ Wed Oct 21, 2020 9:26 pm ]
Post subject:  High port head for sale

Hi, see the ad in the website For Sale section.

$2000 or offer

Sydney Clutch, Brake and Cylinder Head Reconditioning, Epsom Rd, Zetland advise the seats and head are OK and it only needs a basic service i.e lap valves and seats, light skim etc
3.245" thick (85 thou off) but best to measure it yourself if that is a concern
Ported and polished with enlarged inlet valves
Has exhaust valves but no inlet valves, springs, collets etc
Guides are probably good as the head was overhauled not long before I swapped it for a stock head
I don't need this head, I have a 2nd complete one I'll keep as a spare .

SOLD

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/